Lexmark E360D series 문제 해결 매뉴얼 - 페이지 7

{카테고리_이름} Lexmark E360D series에 대한 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark E360D series 8 페이지. Loading paper
Lexmark E360D series에 대해서도 마찬가지입니다: 설정 및 설치 (2 페이지), 브로셔 및 사양 (4 페이지), 브로셔 및 사양 (4 페이지), 빠른 참조 (2 페이지), 보충 설명서 (5 페이지), (독일어) 보충 설명서 (9 페이지)

페이지 인쇄

HE TONER CARTRIDGE IS DEFECTIVE

Replace the toner cartridge.

AKE SURE THE PAPER PATH IS CLEAR

Paper could be caught between the photoconductor kit and

the fuser. Check the paper path around the fuser area.

Warning—Potential Damage: Do not touch the

photoconductor on the underside of the photoconductor kit.

Use the cartridge handle whenever you are holding the

cartridge.

CAUTION—HOT SURFACE: The inside of the printer

might be hot. To reduce the risk of injury from a hot

component, allow the surface to cool before touching.

Clear any paper you see.

HERE MAY BE EXCESS TONER IN THE PAPER PATH

Contact Customer Support.

Solid black or white streaks appear on

transparencies or paper

These are possible solutions. Try one or more of the following:

AKE SURE THE FILL PATTERN IS CORRECT

If the fill pattern is incorrect, choose a different fill pattern from

your software program.

HECK THE PAPER TYPE

•

Try a different type of paper.

•

For transparencies, use only ones recommended by the

printer manufacturer.

•

Make sure the Paper Type setting matches what is loaded

in the tray or feeder.

•

Make sure the Paper Texture setting is correct for the type

of paper or specialty media loaded in the tray or feeder.

AKE SURE THE TONER IS DISTRIBUTED EVENLY IN THE

TONER CARTRIDGE

Remove the toner cartridge and shake it from side to side to

redistribute the toner to extend the life of the cartridge, and

then reinstall it.

HE TONER CARTRIDGE MAY BE DEFECTIVE OR LOW ON

TONER

Replace the used toner cartridge with a new one.

Embedded Web Server does

not open

These are possible solutions. Try one or more of the following:

HECK THE NETWORK CONNECTIONS

Make sure the printer and computer are turned on and

connected to the same network.

HECK THE NETWORK SETTINGS

Depending on the network settings, you may need to type

https:// instead of http:// before the printer IP address

to access the Embedded Web Server. For more information, see

your system administrator.

Contacting Customer Support

When you call Customer Support, describe the problem you are

experiencing, the message on the display, and the

troubleshooting steps you have already taken to find a solution.

You need to know your printer model type and serial number. For

more information, see the label on the inside top front cover of

the printer. The serial number is also listed on the menu settings

page.

For customer support, contact the place where you purchased

your printer.