Makita 6093D 사용 설명서 - 페이지 9

{카테고리_이름} Makita 6093D에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 6093D 17 페이지. Equipped with electric brake 10 mm (3/8") with fast charger
Makita 6093D에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지)

페이지 인쇄

Adjusting fastening torque

The fastening torque can be adjusted in six

stages by turning the adjusting ring so that

the pointer on the adjusting ring points to

a number on the tool body. The fastening

torque is minimum when the pointer points

to the number 1 and maximum when it

points to the

-8-

marking. The clutch

will

slip at varying torque levels when the

pointer is set a t the numbers 1 to 5. The

clutch is designed not to slip a t the

st-

marking.

Before actual operation, drive a trial screw

into your material or a piece of duplicate

material to determine which torque level

required for a particular application.

Adjusting ring

- - 7 i

NOTE :

The adjusting ring cannot be locked with the pointer positioned half-way between the

numbers.

Screwdriving operation

Place the point of the driver bit in the

screw head and apply pressure to the

tool.

Start the tool slowly and then increase the

speed gradually. Release the trigger as soon

as the clutch cuts in.