Makita 6093D Руководство по эксплуатации - Страница 9
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Сверло Makita 6093D. Makita 6093D 17 страниц. Equipped with electric brake 10 mm (3/8") with fast charger
Также для Makita 6093D: Руководство по эксплуатации (16 страниц)
Печатать страницу
Adjusting fastening torque
I
I
The fastening torque can be adjusted in six
stages by turning the adjusting ring so that
the pointer on the adjusting ring points to
a number on the tool body. The fastening
torque is minimum when the pointer points
to the number 1 and maximum when it
points to the
-8-
marking. The clutch
will
slip at varying torque levels when the
pointer is set a t the numbers 1 to 5. The
clutch is designed not to slip a t the
st-
marking.
Before actual operation, drive a trial screw
into your material or a piece of duplicate
material to determine which torque level
is
required for a particular application.
Adjusting ring
- - 7 i
NOTE :
The adjusting ring cannot be locked with the pointer positioned half-way between the
numbers.
Screwdriving operation
Place the point of the driver bit in the
screw head and apply pressure to the
tool.
Start the tool slowly and then increase the
speed gradually. Release the trigger as soon
as the clutch cuts in.
9