Makita 6093D Kullanım Kılavuzu - Sayfa 9

Matkap Makita 6093D için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita 6093D 17 sayfaları. Equipped with electric brake 10 mm (3/8") with fast charger
Ayrıca Makita 6093D için: Kullanım Kılavuzu (16 sayfalar)

Sayfayı Yazdır

Adjusting fastening torque

The fastening torque can be adjusted in six

stages by turning the adjusting ring so that

the pointer on the adjusting ring points to

a number on the tool body. The fastening

torque is minimum when the pointer points

to the number 1 and maximum when it

points to the

-8-

marking. The clutch

will

slip at varying torque levels when the

pointer is set a t the numbers 1 to 5. The

clutch is designed not to slip a t the

st-

marking.

Before actual operation, drive a trial screw

into your material or a piece of duplicate

material to determine which torque level

required for a particular application.

Adjusting ring

- - 7 i

NOTE :

The adjusting ring cannot be locked with the pointer positioned half-way between the

numbers.

Screwdriving operation

Place the point of the driver bit in the

screw head and apply pressure to the

tool.

Start the tool slowly and then increase the

speed gradually. Release the trigger as soon

as the clutch cuts in.