Fronius TPS 4000 설치 지침 매뉴얼 - 페이지 11

{카테고리_이름} Fronius TPS 4000에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fronius TPS 4000 20 페이지. Second earthing socket at rear
Fronius TPS 4000에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (20 페이지)

페이지 인쇄

Mounting the se-

cond earthing

(3)

socket at the re-

(1+9)

Mounting the second earthing socket

Threading in the cable

Connecting the cable to the front current socket

(g)

(8)

(2)

(k)

(j)

(i)

(h)

(8)

(3)

Mount the rear (-) current-socket

(1), complete with its blanking cap

(9):

Insert the rear (-) current-so-

cket (1), working from the out-

side towards the inside

Insert insulating washer

Screw on the hexagonal nut

Tighten the hexagonal nut with

the torque wrench, width 32

Thightening torque 35 Nm

IMPORTANT! The recess in the cur-

rent socket must point downwards.

Thread the cable (8) through the

rubber lead-throughs (f) and (g)

(f)

Connect the cable to the front cur-

rent socket (1):

Put the belleville spring was-

her (i) over the hexagon head

Housing

screw (h)

Put the star (j) over the hexa-

gon head screw (h)

Put the cable lug of the cable

(8) over the hexagon head

screw (h)

Put the cable lug of the exis-

ting current cable (k) over the

hexagon head screw (h)

Screw the hexagon head screw

(1)

(h) into the current socket

Tighten the hexagon head

screw (h) with the torque

wrench, width 19

Thighting torque 15 - 35 Nm