Fronius TPS 4000 Інструкція з монтажу Посібник з монтажу - Сторінка 11
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Зварювальна система Fronius TPS 4000. Fronius TPS 4000 20 сторінок. Second earthing socket at rear
Також для Fronius TPS 4000: Інструкція з монтажу Посібник з монтажу (20 сторінок)
Друкувати сторінку
Mounting the se-
cond earthing
(3)
socket at the re-
ar
(1+9)
Mounting the second earthing socket
Threading in the cable
Connecting the cable to the front current socket
(g)
(8)
(2)
(k)
(j)
(i)
(h)
(8)
(3)
Mount the rear (-) current-socket
1
(1), complete with its blanking cap
(9):
-
Insert the rear (-) current-so-
cket (1), working from the out-
side towards the inside
-
Insert insulating washer
-
Screw on the hexagonal nut
-
Tighten the hexagonal nut with
the torque wrench, width 32
-
Thightening torque 35 Nm
IMPORTANT! The recess in the cur-
rent socket must point downwards.
Thread the cable (8) through the
2
rubber lead-throughs (f) and (g)
(f)
Connect the cable to the front cur-
3
rent socket (1):
-
Put the belleville spring was-
her (i) over the hexagon head
Housing
screw (h)
-
Put the star (j) over the hexa-
gon head screw (h)
-
Put the cable lug of the cable
(8) over the hexagon head
screw (h)
-
Put the cable lug of the exis-
ting current cable (k) over the
hexagon head screw (h)
-
Screw the hexagon head screw
(1)
(h) into the current socket
-
Tighten the hexagon head
screw (h) with the torque
wrench, width 19
-
Thighting torque 15 - 35 Nm
11