Gardena PowerJet Li-40 운영자 매뉴얼 - 페이지 5
{카테고리_이름} Gardena PowerJet Li-40에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena PowerJet Li-40 18 페이지. Battery blower / vacuum
Gardena PowerJet Li-40에 대해서도 마찬가지입니다: 운영자 매뉴얼 (18 페이지), 운영자 매뉴얼 (18 페이지)
페이지 인쇄
Stay alert, watch what you are doing and use common
sense when operating a power tool.
Do not use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment of
2. ASSEMBLY
Assembling for blower mode:
2
3
1
6
7
5
inattention while operating power tools may result in
s erious personal injury.
Do not disassemble the product further than the delivery
status.
DANGER! Risk of injury!
Cut injury when the rotor blades turn or the product
starts accidentally.
v Remove the battery and wait for the rotor blades to stop
before you assemble the product.
DANGER! Cut injury!
v Assemble the blower tube and the intake cover
completely before you use the product in blower
mode.
To assemble the blower tube:
Note: When the blower tube is not assembled correctly, a safety
switch will prevent the blower from starting.
1. Push the blower tube
3
interlock
audibly engages.
4
2. Optional for blowing in corners you can put the nozzle
the blower tube
To remove the blower tube
1
blower tube
.
To assemble the intake cover:
Note: When the intake cover is not assembled correctly, a safety
switch will prevent the blower from starting.
v Close the intake cover
7
interlock
audibly engages.
To open the intake cover
5
intake cover
.
1
onto the blower outlet
1
until it audibly engages.
1
push the interlock
5
on the blower inlet
5
push the interlock
2
until the
4
on
3
and remove the
6
until the
7
and open the
17