Garmin GNS 430 운영 매뉴얼 - 페이지 9

{카테고리_이름} Garmin GNS 430에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GNS 430 27 페이지. Friendlypanels gps for microsoft fs9 & fsx
Garmin GNS 430에 대해서도 마찬가지입니다: 파일럿 매뉴얼 (22 페이지), 사용 설명서 (6 페이지), 파일럿 매뉴얼 부록 (27 페이지), 파일럿 매뉴얼 부록 (4 페이지), 빠른 참조 (23 페이지), 파일럿 매뉴얼 부록 (22 페이지), 사양 (2 페이지), 파일럿 운영 핸드북 (10 페이지), 빠른 참조 (17 페이지)

Map Panning

Another Map Page function is panning, which allows the map to move beyond its

current limits without adjusting the map range when map orientation is North Up.

When the panning function is selected (by pressing the small right knob while map

orientation is North Up), large and small right knob is used to move the map left or right

and up or down. MAP PANNING is displayed in the top of the map screen while this

mode is active. Pressing CLR while MAP PANNING is displayed in the top reset the

pan to the center position.

To change NAVAIDS displayed:

1. From the Map Page Menu, turn the large right knob to highlight 'Setup Map?'

and press the ENT Key.

2. Turn the large right knob to select 'NAVAID' and press the ENT Key.

3. Using large right knob select desired NAVAID to turn on or off, select off or on

with small right knob and press ENT.

Selecting Full Screen Map

The 'Data Fields Off?' option provides a full-screen Map Display, without the four data

fields along the right-hand side of the screen. Select this option to display a larger map

area. If this option has been selected and the data fields are off, 'Data Fields On?'

appears as an option instead in the page menu.

Selecting Desired On-Screen Data

'Change Fields?' allows selection of the data displayed on the four user-selectable data

fields along the righthand side of the Map Page. There are eleven available data types,

as descrbed in DEFAULT NAV PAGE above. Refer to that section to see how to

change the fields.