Garmin Fishfinder 320C 사용 설명서 및 참조 설명서 - 페이지 20

{카테고리_이름} Garmin Fishfinder 320C에 대한 사용 설명서 및 참조 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Fishfinder 320C 38 페이지. Sunlight-readable color sonar
Garmin Fishfinder 320C에 대해서도 마찬가지입니다: 템플릿 매뉴얼 (1 페이지), 사양 (2 페이지), 사양 (2 페이지)

페이지 인쇄

1. Wiring and Interfacing

Unit Operation

Adjustment Menu Options

Resizing the Sonar Split

The current frequency setting will

display at the bottom of the screen.

• Whiteline — controls how the unit displays information about the bottom type (hard or soft). With

the Whiteline 'Off', all high-intensity bottom returns will display as red. With Whiteline set at 'Normal' or

1-100%, this option can be used to better determine bottom hardness. See page 24 for more information on

this feature.

• Frequency — allows you to choose a sonar operation frequency. Frequency refers to the "pitch" of the

sound that the transducer sends and receives. You may choose '200kHz', '50kHz' or 'Dual' frequency.

You may resize

• Depth Line — adds a horizontal depth line across the display which is used to measure the depth

the split line to

of underwater objects. The depth of the line will appear in a box on the right side of the line. Press UP or

the left or right.

DOWN on the ARROW KEYPAD to control the position of the line on the graph.

• Noise Reject — helps ﬁ lter unwanted noise from the graph. The 'Noise Reject' tool can be turned

'Off', set to 'Normal' (automatically adjusts for optimum viewing) or to a ﬁ xed 1-100% setting. When setting

the Noise Reject tool: the HIGHER the noise rejection setting, the more likely the unit is to NOT show ﬁ sh

or structure.

• Scroll — adjusts the rate that the graph scrolls from right to left. If you are sitting still or the graph

is moving too fast, slowing the scroll rate or pausing it can be beneﬁ cial. 'Auto' will automatically adjust the

scroll rate according to the boat' s speed. (See also 'Automatic Scroll Speed Limit' on page 19.)

• Size Split — enables width adjustment of the Sonar Page split screen. This option is only available

when a split zoom is selected. You may adjust the size of the split window anywhere from 1/4 to 3/4 width

from the right half of the Sonar Page.

To resize the Sonar Page split screen:

1. From the Sonar Page split screen, press MENU.

2. Using the ARROW KEYPAD, highlight 'Size Split' and press ENTER.

3. Move the horizontal double-arrow LEFT or RIGHT using the ARROW KEYPAD until the desired vertical

width line shows, then press ENTER.

4. If you wish to cancel this operation, press QUIT.

• Defaults — restores Adjustment Options back to original factory settings.