Fujitsu PRIMERGY TX120 S2 서비스 보충 설명서 - 페이지 34
{카테고리_이름} Fujitsu PRIMERGY TX120 S2에 대한 서비스 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu PRIMERGY TX120 S2 38 페이지.
페이지 인쇄Replacing the TPM board
4.7
Replacing the TPM board
Ê Open the server as described in
Ê Remove the system board as described in
board" on page
Ê Lay the system board on a soft, antistatic surface with its component side
facing down.
Ê Locate the slotted lower end of the TPM
screw (see adjoining figure).
Remove the TPM screw using a thin
slotted screwdriver (e.g. watchmaker's
screwdriver).
V
CAUTION!
Ensure to turn the screw
clockwise in order to remove it!
Otherwise the thin metal bar may
break, rendering it impossible to unscrew the screw.
Ê Remove the defective TPM board on the upper side of the system board.
Ê Reinstall the system board and all its components as described in
"Replacing the system board" on page
34
section "Preparation" on page
31.
Service Supplement
Replacement routines
section "Replacing the system
31.
17.
section
TX120 S2