Fujitsu FI-5900C 시작하기 - 페이지 12

{카테고리_이름} Fujitsu FI-5900C에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu FI-5900C 30 페이지. Consumable replacement and cleaning instructions
Fujitsu FI-5900C에 대해서도 마찬가지입니다: 시작하기 (30 페이지), 설치 절차 매뉴얼 (7 페이지), 설치 절차 매뉴얼 (9 페이지), 설치 절차 (3 페이지), 브로셔 및 사양 (2 페이지), 보충 설명서 (4 페이지), 브로셔 및 사양 (4 페이지), 소모품 교체 및 청소 지침 (24 페이지), 교체 절차 (22 페이지), 청소 지침 (2 페이지)

페이지 인쇄

Chapter2

2.1 Installing the Scanner

1. Place the scanner at its installation site.

For details on the scanner's dimensions and

required installation space, refer to the fi-5900C

Operator's Guide, chapter "10. Scanner Specifi-

cations".

•

The scanner weight is 50 kg (110 lb).

ATTENTION

Make sure two persons are available

when moving the scanner.

•

When carrying the scanner, only grip the

bottom side.

2. Connect the AC cable to the Power inlet of the

scanner and plug it into an outlet.

Use only the power cable provided by the

ATTENTION

manufacturer.

The Function Number Display and the LED

HINT

may flash for an instant when plugging the

AC cable into the outlet. This is not a mal-

function.

INSTALLATION OF THE SCANNER

2.2 Connecting the Scanner to

Your PC

Connect either using the USB or SCSI interface.

This scanner is provided with two inter-

ATTENTION

faces: Ultra SCSI and USB 2.0 /1.1. Con-

nect only one of the USB or SCSI cable.

■ Connecting the USB Interface

1. Connect the USB cable to the USB connector.

2. Connect the other end of the USB cable to

your PC.

•

Be sure to use the USB cable which

ATTENTION

comes with this scanner. Correct opera-

tion with commercially available cables

is not guaranteed.

•

When connecting to a USB hub, use the

first stage USB hub that is closest to the

computer. If you use the second or later

hub stages, the scanner may not oper-

ate correctly.

•

If you connect the scanner with USB 2.0,

it is required that the USB port and Hub

are compliant with USB 2.0. The scan-

ning speed may slow down if it is con-

nected with USB1.1.