9. Select a language for the installation on the
[Choose Setup Language] dialog box, and then
click the [Next] button.
10. Install the driver, following the on-screen
instructions.
11. When you see the [InstallShield Wizard Com-
plete] dialog box, click the [Finish] button.
Your computer will restart and detect the scanner. Do
not remove the Setup CD-ROM from the CD drive until
your computer completely starts up again.
•
Depending on the state of the operating
ATTENTION
system, the computer may shut down
and restart. In this case, the computer
detects the scanner when it starts up.
Do not remove the Setup CD-ROM from
the CD drive until the computer com-
pletely starts up again.
•
Depending on the operating system you
are using, you may need to do the fol-
lowing.
Windows 2000:
If you see the [Digital Signature not
Found] dialog box, click the [Yes]
button.
Windows Vista:
If you see the [Found New Hardware]
dialog box, select [Locate and install
driver software], and then in the [User
Account Control] dialog box, click the
[Continue] button, if it is displayed.
The installation of FUJITSU TWAIn 32 is complete.
Next, install ScandAll PRO (
To make sure that FUJITSU TWAIN 32 is
ATTENTION
successfully installed, perform a scan with
a TWAIN-compliant application such as
ScandAll PRO. For information about how
to scan with ScandAll PRO, refer to
section
"2.4 Checking Scanner Driver
Operation" on page
8
).
page 10
12.
For FUJITSU ISIS Scanner Driver
FUJITSU ISIS is an ISIS-compliant scanner driver.
To use this scanner with any ISIS-compatible application,
install FUJITSU ISIS, following the procedure below.
■ Preparation
Do the following before installing the driver:
•
Unpack the Setup CD-ROM, but do not insert
the Setup CD-ROM into the CD drive yet.
•
Connect the scanner correctly to your computer.
For details on how to connect the scanner,
HINT
refer to
"2.2 Connecting the Scanner to Your
PC" on page
■ Installing the FUJITSU ISIS
Scanner Driver
Screenshots taken in Windows XP are used
HINT
as examples. The displayed windows and
operations may slightly vary depending on
the operating system you are using.
1. Open the hopper.
Be sure to open the hopper before turning
ATTENTION
on the power with the Power button.
2. Press the Power button to turn on the scanner.
4.
Power button
Hopper
페이지 인쇄