3.
Turn on your computer, and then log on to
Windows.
Be sure to log on as a user with "Administra-
ATTENTION
tor" privileges.
4.
When the scanner is automatically detected, [Found
New Hardware Wizard] or [Add/Remove Hardware
Wizard] dialog box appears. Click the [Cancel]
button to close the Wizard dialog box.
5.
Insert the "Setup CD-ROM" into the CD drive.
⇒
<SETUP DISK START UP SCREEN> appears.
This screen may not appear if the "AutoPlay"
ATTENTION
setting is set to off. In this case, find
"Install.exe" in the CD-ROM using "Explore"
or "My Computer" and execute it.
6.
Click [INSTALL PRODUCTS], and then click [ISIS
Driver].
7. The Error Recovery Guide Installation window
appears.
Th Error Recovery Guide is an application with which
you can view on-screen information for troubleshoot-
ing errors that may occur in the scanner. This guide
helps solve problems, so select [Yes] to install it. You
may also choose to install it later.
ATTENTION
8. Image Processing Software Option installation
windows appears.
The Image Processing software is an optional
software that provides advanced binarization
image processing to the scanner dirver.
ATTENTION
9.
Select a language for the installation on the
[Choose Setup Language] dialog box, and then
click the [Next] button.
10. Install the driver, following the on-screen
instructions.
11. When you see the [InstallShield Wiizard Com-
plete] dialog box, click the [Finish] button.
Your computer will restart and detect the scanner. Do not
remove the Setup CD-ROM from the CD drive until your
computer completely starts up again.
fi-5900C Image Scanner Getting Started
After you select [Yes] for installing Error
Recovery Guide, the [Choose Setup
Language] dialog box appears. Select a
language and follow the on-screen
instructions. The Error Recovery Guide
dialog box is automatically displayed when
the installation is complete. Wait until the
installation of the ISIS driver starts.
Selecting [Yes] in the Image Processing
Software Option installation window will
automatically execute the installation. Click
the [OK] button on the confirmation mes-
sage that appears when the installation is
complete. After that the ISIS driver installa-
tion is started.
9
페이지 인쇄