Fujitsu ScanSnap fi-5110C 시작하기 - 페이지 24
{카테고리_이름} Fujitsu ScanSnap fi-5110C에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ScanSnap fi-5110C 27 페이지. Color duplex workgroup scanner
Fujitsu ScanSnap fi-5110C에 대해서도 마찬가지입니다: 브로셔 및 사양 (2 페이지), 데이터시트 (2 페이지)
페이지 인쇄
■ Temporary error
Indication
U1
Paper feed error
U2
Multi Feed error
U4
The ADF has been opened during
scanning.
To troubleshoot the indicated errors above:
• "U1" error
Remove all jammed documents.
Confirm that the documents meet the paper condi-
tions for scanning.
Refer to fi-5110C Operator's Guide "7.2 Document
Quality" on the Setup CD-ROM.
• "U2" error
Remove all jammed documents.
Confirm that the documents are within the required
paper preconditions for scanning.
Refer to fi-5110C Operator's Guide "7.2 Document
Quality" on the Setup CD-ROM.
• "U4" error
Close the ADF cover completely. For the details,
refer to "6 TROUBLESHOOTING" in the "fi-
5110C Operator's Guide" on the Setup CD-ROM.
AP-3
Meaning
■ Device alarm (Non-Temporary error)
Indication
E2
Trouble in the optical system (front).
E3
Trouble in the optical system (back).
E4
The motor's fuse has blown out.
E6
Trouble with the operator panel.
E7
Trouble occurred with the EEPROM.
E9
An error in the image memory.
Ec
An alarm in the memory.
When you encounter any alarm on the display, turn
the scanner off and on. If the alarm is still displayed
on the Function Number display, contact the store
where you purchased the scanner or an authorized
FUJITSU scanner service provider.
Meaning