Fujitsu ScanSnap iX500 시작하기 매뉴얼 - 페이지 7
{카테고리_이름} Fujitsu ScanSnap iX500에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ScanSnap iX500 16 페이지. Windows
Fujitsu ScanSnap iX500에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (17 페이지), 빠른 설정 매뉴얼 (3 페이지), 시작하기 (18 페이지), 안전 주의사항 (11 페이지), 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), Wi-Fi 연결 매뉴얼 (41 페이지)
페이지 인쇄
Mac OS Installation
■ Software
You can install the following software.
ScanSnap Manager (Scanner driver)
CardMinder (Business card management application)
ABBYY FineReader for ScanSnap
Install other software bundled with the ScanSnap as needed.
For details about each software and its installation procedures, refer to "Installing the Software" in the
Operator's Guide.
■ System Requirements
For the latest information on requirements, please visit the ScanSnap Support Site at:
http://scansnap.fujitsu.com/g-support/en/
Operating system (*)
CPU
Memory
Display
resolution
Hard disk space
USB port
* : It is recommended to apply the latest updates to Mac OS.
ATTENTION
If the system requirements above are not satisfied, the ScanSnap may not operate.
Scanning speed will slow down in the following cases:
- The CPU or the memory does not meet the required specifications
- The version of the USB port or the USB hub is USB 1.1
■ Installation
HINT
When the installation is complete, the [ScanSnap Online Update] window may appear. For details, refer to
the ScanSnap Online Update Help.
1.
Turn your computer on and log on as a user with Administrator privileges.
2.
Insert the Setup DVD-ROM into the DVD-ROM drive.
The [ScanSnap] window appears.
(OCR application)
™
OS X v10.8 (Recommended: 10.8.1 or later)
Mac OS X v10.7 (Recommended: 10.7.4 or later)
Mac OS X v10.6 (Recommended: 10.6.8)
®
Intel
Core
2 Duo 2.4 GHz or higher
™
®
(Recommended: Intel
2 GB or more (Recommended: 4 GB or more)
1024
768 pixels or higher
×
2740 MB or more of free hard disk space
USB 3.0/USB 2.0/USB 1.1
Core™ i5 2.5 GHz or higher)
7