Fujitsu ScanSnap iX500 시작하기 매뉴얼 - 페이지 8
{카테고리_이름} Fujitsu ScanSnap iX500에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ScanSnap iX500 16 페이지. Windows
Fujitsu ScanSnap iX500에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (17 페이지), 빠른 설정 매뉴얼 (3 페이지), 시작하기 (18 페이지), 안전 주의사항 (11 페이지), 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), Wi-Fi 연결 매뉴얼 (41 페이지)
페이지 인쇄
3.
Double-click the [ScanSnap] icon.
Follow the instructions on the screen to continue with
the installation.
When you proceed with the operation, the [ScanSnap
- Connecting the ScanSnap] window appears.
4.
Follow the instructions on the screen to connect
the ScanSnap to the computer.
Click the [Next] button, and follow the instructions on
the screen to connect the ScanSnap to the
computer.
For details, refer to
(page
9).
When the connection check is complete, the
[ScanSnap Wireless Network Setup] window
appears.
Check the ScanSnap operation before connecting the
ScanSnap and a mobile device via wireless LAN.
5.
Check the operation of the ScanSnap.
For details, refer to
6.
Select whether you want to configure the wireless
settings for connecting the ScanSnap and the
mobile device via wireless LAN.
To configure the wireless settings, click the [Setup
Now] button, and then follow the instructions on the
screen. For details, refer to
ScanSnap to a Mobile Device via Wireless LAN"
(page 12)
.
Otherwise, click the [Later] button.
HINT
If you want to configure the wireless settings for connecting the ScanSnap and the mobile device via
wireless LAN at another time, refer to the Operator's Guide.
7.
Remove the Setup DVD-ROM from the DVD-ROM drive.
"Connecting the ScanSnap"
"Scan Test" (page
11).
"Connecting the
8
.