Fujitsu ScanSnap iX500 Wi-Fi 연결 매뉴얼 - 페이지 24

{카테고리_이름} Fujitsu ScanSnap iX500에 대한 Wi-Fi 연결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ScanSnap iX500 41 페이지. Windows
Fujitsu ScanSnap iX500에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (17 페이지), 시작하기 매뉴얼 (16 페이지), 빠른 설정 매뉴얼 (3 페이지), 시작하기 (18 페이지), 안전 주의사항 (11 페이지), 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지)

HINT

If the Setup Wizard does not appear, it can also be opened by the following procedure:

For iOS

On the [File List] window, tap the [Settings] button.

The menu appears.

ii. Tap [Setup Wizard].

For Android

On the [File List] window, tap the Settings icon.

The menu appears.

ii. Tap [Setup Wizard].

A connection completion message appears.

Check the scanning operation with the ScanSnap.

HINT

l If a connection completion message does not appear, the settings on the computer may not be

completed. Using ScanSnap Wireless Setup Tool on the computer, set up the wireless network to

connect the ScanSnap to a wireless LAN.

l Using ScanSnap Wireless Setup Tool allows you to set up a wireless network at any time to

connect the ScanSnap to a wireless LAN. When you install ScanSnap Manager, ScanSnap

Wireless Setup Tool is installed at the same time.

Start ScanSnap Wireless Setup Tool in the following procedure:

1. Connect the ScanSnap and the computer with a USB cable.

2. Open the ADF paper chute (cover) of the ScanSnap to turn the power on, and then turn on the

Wi-Fi switch on the back of the ScanSnap.

3. Select [Start] menu → [All Programs] → [ScanSnap Manager] → [ScanSnap Wireless Setup

Tool] (for Windows 8.1/Windows 8, select [ScanSnap Manager] → [ScanSnap Wireless Setup

Tool] on the All apps screen).

The ScanSnap Wireless Setup Tool will start running.

4. Click the [Wireless Network Setup Wizard] button in the main menu.

The Wireless Network Setup Wizard appears.

l It may take a while for Wireless Setup Tool to start running. If ScanSnap Wireless Setup Tool does

not start even after you wait for a while, restart the computer and then start ScanSnap Wireless

Setup Tool again.

l ScanSnap Connect Application and ScanSnap Manager are used in the following order of priority:

1. ScanSnap Connect Application

2. ScanSnap Manager (connected via a USB cable)

3. ScanSnap Manager (connected via wireless LAN)

l To use ScanSnap Manager (connected via wireless LAN) for connection, exit ScanSnap Connect

Application.

Network Connection