Fujitsu Eternus DX200F 운영 매뉴얼 - 페이지 30

{카테고리_이름} Fujitsu Eternus DX200F에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Eternus DX200F 48 페이지. Hybrid storage systems, all-flash arrays, power synchronized unit
Fujitsu Eternus DX200F에 대해서도 마찬가지입니다: 설정 매뉴얼 (10 페이지), 구성 매뉴얼 (28 페이지), 구성 매뉴얼 (13 페이지), 구성 매뉴얼 (16 페이지), 구성 매뉴얼 (38 페이지), 안전 주의사항 (12 페이지)

Fujitsu Eternus DX200F 운영 매뉴얼
Chapter 4
Maintaining Optional Products
4.1
Installing Additional Drives
4.1.2

Drive Handling Instructions

About Condensation
About Static Electricity
Do
When moving a drive from a cold place, such as an unconditioned store house in
winter, to a warmer place such as an air-conditioned room, the severe temperature
change may result in condensation forming.
To avoid this, allow the packed drive sufficient time in the warmer place (one hour
for each 15°C of temperature difference) to adapt to the new temperature.
Do Not
Do not touch the surface of the board of the drives.
Do
When handling drives, make sure to wear a wrist strap or touch a metal part to dis-
charge the human body's natural static electricity. Failure to discharge static elec-
tricity may cause device failure.
Leave the drive in its package until ready to install it.
30
FUJITSU Storage ETERNUS DX200F All Flash Array Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-8472-01ENZ0