Fujitsu Eternus DX200F 운영 매뉴얼 - 페이지 31

{카테고리_이름} Fujitsu Eternus DX200F에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Eternus DX200F 48 페이지. Hybrid storage systems, all-flash arrays, power synchronized unit
Fujitsu Eternus DX200F에 대해서도 마찬가지입니다: 설정 매뉴얼 (10 페이지), 구성 매뉴얼 (28 페이지), 구성 매뉴얼 (13 페이지), 구성 매뉴얼 (16 페이지), 구성 매뉴얼 (38 페이지), 안전 주의사항 (12 페이지)

페이지 인쇄

1. Powering off

Chapter 4

Maintaining Optional Products

4.1

Installing Additional Drives

■

About Shock

4.1.3

Additional Drive Installation Procedure

This section explains how to install optional drives in the ETERNUS DX.

Drives can be installed in any slots.

In the [Storage] screen of [Component] on the ETERNUS Web GUI screen, check that all components of

the ETERNUS DX are in normal status.

Wear a wrist strap or touch a metal part to discharge the human body's natural static electricity.

Do Not

Do not lay the drives directly on a desk or similar hard surface. Always use a rubber

•

mat or other soft material to cushion the drives against physical shocks.

Do not stack drives or stand drives on end.

•

Do not apply external force to the interface connectors.

•

Do not knock or drop the drives on hard objects.

•

If components are installed in a way other as described in this section, damage

and/or device failure or electrical shock may occur.

Do Not

•

Do not install drives that are for use in other devices.

FUJITSU Storage ETERNUS DX200F All Flash Array Operation Guide (Basic)

P3AM-8472-01ENZ0