Fujitsu Eternus DX200F Panduan Pengoperasian - Halaman 31

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Penyimpanan Fujitsu Eternus DX200F. Fujitsu Eternus DX200F 48 halaman. Hybrid storage systems, all-flash arrays, power synchronized unit
Juga untuk Fujitsu Eternus DX200F: Setup Manual (10 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (13 halaman), Panduan Konfigurasi (16 halaman), Panduan Konfigurasi (38 halaman), Tindakan Pencegahan Keselamatan (12 halaman)

Halaman Cetak
Fujitsu Eternus DX200F Panduan Pengoperasian
Chapter 4
Maintaining Optional Products
4.1
Installing Additional Drives
■
About Shock
4.1.3

Additional Drive Installation Procedure

This section explains how to install optional drives in the ETERNUS DX.
Drives can be installed in any slots.
1
In the [Storage] screen of [Component] on the ETERNUS Web GUI screen, check that all components of
the ETERNUS DX are in normal status.
2
Wear a wrist strap or touch a metal part to discharge the human body's natural static electricity.
Do Not
Do not lay the drives directly on a desk or similar hard surface. Always use a rubber
•
mat or other soft material to cushion the drives against physical shocks.
Do not stack drives or stand drives on end.
•
Do not apply external force to the interface connectors.
•
Do not knock or drop the drives on hard objects.
•
Do
•
If components are installed in a way other as described in this section, damage
and/or device failure or electrical shock may occur.
Do Not
•
Do not install drives that are for use in other devices.
31
FUJITSU Storage ETERNUS DX200F All Flash Array Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-8472-01ENZ0