Fujitsu Eternus DX200F Panduan Pengoperasian - Halaman 30

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Penyimpanan Fujitsu Eternus DX200F. Fujitsu Eternus DX200F 48 halaman. Hybrid storage systems, all-flash arrays, power synchronized unit
Juga untuk Fujitsu Eternus DX200F: Setup Manual (10 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (13 halaman), Panduan Konfigurasi (16 halaman), Panduan Konfigurasi (38 halaman), Tindakan Pencegahan Keselamatan (12 halaman)

Halaman Cetak
Fujitsu Eternus DX200F Panduan Pengoperasian
Chapter 4
Maintaining Optional Products
4.1
Installing Additional Drives
4.1.2

Drive Handling Instructions

■
About Condensation
■
About Static Electricity
Do
When moving a drive from a cold place, such as an unconditioned store house in
•
winter, to a warmer place such as an air-conditioned room, the severe temperature
change may result in condensation forming.
To avoid this, allow the packed drive sufficient time in the warmer place (one hour
for each 15°C of temperature difference) to adapt to the new temperature.
Do Not
Do not touch the surface of the board of the drives.
•
Do
•
When handling drives, make sure to wear a wrist strap or touch a metal part to dis-
charge the human body's natural static electricity. Failure to discharge static elec-
tricity may cause device failure.
Leave the drive in its package until ready to install it.
•
30
FUJITSU Storage ETERNUS DX200F All Flash Array Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-8472-01ENZ0