Fujitsu D2860 기술 매뉴얼 - 페이지 29

{카테고리_이름} Fujitsu D2860에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu D2860 32 페이지. For bx920

Features

Switch 3 - BIOS Recovery

Switch 3 allows the system BIOS to be restored after an erroneous update. To

restore the system BIOS you need a "BIOS flashing medium" (for more infor-

mation, refer to the BIOS manual or contact the customer service team).

The system starts from the "BIOS flashing medium" (ODD, USB stick)

and reprograms the system BIOS on the board.

off

The system starts with the system BIOS of the system board (default

setting)

Switch 4 - TBS Override

This switch currently has no function.

TPM jumper

Figure 10: Position of the TPM jumper (TPM enable)

As default the jumper (1-2) is set. Without jumper the TPM function is

disabled.

D2860 (BX920)

TPM enable

Signal

TPM RESET L

ICH TMP DIS L

Technical Manual

Settings with switches and jumpers

TPM CON

Description

Reset of the TPM module

Reset of ICH10