AEG 2020 D 작동 및 설치 지침 - 페이지 12

{카테고리_이름} AEG 2020 D에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 2020 D 21 페이지. Cooker hood
AEG 2020 D에 대해서도 마찬가지입니다: 작동 및 설치 지침 (20 페이지)

Clearance Heights

The cooker hood is designed to be fitted over a cooking

appliance at the clearance heights stated, provided the

maximum output of the appliance beneath does not

exceed the maximums quoted in the Technical

Specifications.

If the output of the appliance below the cooker hood

exceeds the maximum outputs quoted, please refer to

the cooker manufacturer's installation instructions.

A minimum clearance height of 650mm (25 1/2 ins) is

required when installed above a built-in electric hob, or

700mm (27 1/2 ins) when installed above a built-in gas

hob.

A minimum clearance height of 685mm (27 ins) is

required when installed above a slot-in electric oven, or

787mm (30 1/2 ins) when installed above a slot-in gas

oven.

When installed between adjoining wall cabinets, the wall

cabinets must not overhang the hob and the distance

beetween the underside of the cabinet and the worktop

must be 450mm. If the height of the wall cabinet is less

than 450mm a gap of 50mm must be maintained

either side of the hob.

This cooker hood must not be installed

above a cooking appliance with a high

level grill.

The extraction unit at the top of the chimney can be

installed in one of three ways.

Air outlet turned upwards recirculation only (fig.

2a).

Air outlet turned towards the wall -extraction only

(fig. 3).

Air outlet turned left or right -extraction only (fig.

4a and 4b).

INSTALLING THE COOKER HOOD

A: Built-in Electric Hob:

B: Built-in Gas hob:

C: Slot-in Electric Cooker: 685mm minimum clearance

D: Slot-in Gas Cooker:

Hob

650mm minimum clearance

700mm minimum clearance

787mm minimum clearance