AEG 502 D 작동 및 설치 지침 - 페이지 10
{카테고리_이름} AEG 502 D에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 502 D 20 페이지. Electrolux extractor hood installation and operating instructions
AEG 502 D에 대해서도 마찬가지입니다: 설치 및 운영 지침 매뉴얼 (16 페이지)
페이지 인쇄
Fixing
After having adjusted the hood for the version required, it may be
installed.
the hood
This appliance is designed for fitting in a cabinet or some other
support.
The opening to be made on the bottom of the wall-hung cabinet
must correspond with the measurements shown in fig. 4
(495 X 260 mm).
To fix the hood proceed as follows:
a) remove the grid.
b) Fit the hood into the opening.
c) Secure the unit to the cabinet by screwing up screws through
holes C (fig. 4).
d) Replace the grid.
C
C
4
10