AEG 502 D 작동 및 설치 지침 - 페이지 5

{카테고리_이름} AEG 502 D에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 502 D 20 페이지. Electrolux extractor hood installation and operating instructions
AEG 502 D에 대해서도 마찬가지입니다: 설치 및 운영 지침 매뉴얼 (16 페이지)

페이지 인쇄

Electrical connection for the UK

The appliance must be connected to fixed wiring with a double

pole switched fused spur outlet with or without pilot lamp.

We strongly recommend the appliance to be connected only by a

qualified electrician who is a member of the NICEIC who will com-

ply with the IEE and any local regulations.

NOTE:

The terminology "DOUBLE POLE" means that both the live

and the neutral supplies are switched and disconnected at

the same time.

The terminations labelled SUPPLY are for the connection for the

internal house wiring and the terminations labelled LOAD are for

the appliance.

IMPORTANT

The wires of the mains lead supplied with this appliance are

coloured in accordance with the following code:

As the colours of the flexible cord of this appliance may not

correspond with the coloured markings identifying the ter-

minals in the plug, proceed as follows: The wire which is

coloured brown must be connected to the terminal which is

marked with the letter L or coloured red.

The wire which is coloured blue must be connected to the

terminal which is marked with the letter N or coloured black.

FUSE

Blue-Neutral

Brown-Live

BLUE

(NEUTRAL)

LOAD

SUPPLY

BROWN

(LIVE)

LOAD

SUPPLY

DP 13A, 250V

Appliances

with 2 wires