Avnet ZUBOARD 1CG 시작하기 매뉴얼 - 페이지 11

{카테고리_이름} Avnet ZUBOARD 1CG에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Avnet ZUBOARD 1CG 14 페이지.

12.

First, make sure your PC is on the same network as ZUBoard

VPN or firewall that may prevent communication across the network. Open a browser

window. Then enter the IP you discovered for ZUBoard 1CG in the previous step.

If the ZUBoard 1CG is connected directly to the host PC's ethernet, the PC's

13.

ethernet properties will need to be changed to match Netmask, Gateway, and Board

IP.

Results are then displayed in browser window, as shown below.

Figure 8 – Out of the Box example results on ZUBoard 1CG

14. Review the results and interact with ZUBoard 1CG FreeRTOS "Out of the Box" Example.

Power off

When you are finished experimenting with FreeRTOS on ZUBoard 1CG, you should shut

FreeRTOS down by pressing the Power ON/OFF (SW7) for 10 second, or you may remove

power by unplugging the USB C cable.

The ZUBoard 1CG is a versatile development kit that allows evaluation of the Zynq SoC, which

can help you adopt Zynq into your next design. All technical support is offered by your local

Avnet resource or through element 14 Avnet Boards Forum

ZUBoard 1CG users are encouraged to participate in the forums and offer help to others when

http://avnet.me/zuboard-1cg-forum

possible.

http://avnet.me/zuboard-1cg-forum

Page 11

1CG. Also, turn off any