aqua greek products F-105LAR-01 지침 - 페이지 2

{카테고리_이름} aqua greek products F-105LAR-01에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. aqua greek products F-105LAR-01 3 페이지.

The pull out legrest assembly is designed to t under the chair and is installed inside the 2" square

tubing that supports the chair from underneath. To install the pull out legrest;

1. With a at-blade screwdriver, pry o the 2" square plug from the end of the 2" square tube of

the seat arm.

2. Drill a 9/32" hole at the location indicated in the drawing below through the bottom of the

chair support tube. Drill only through the bottom of the tube. Remove the burrs from the hole

before installing the legrest assembly.

2" SQUARE

PLUG

Installation Instructions:

SEAT

DRILL

9/32" HOLE

(BOTTOM OF CHAIR SUPPORT TUBE)

(SEE FIGURE TO THE RIGHT)

SEAT ARM

DRILL

9/32"

3/4"

(THIS SIDE)

Revised 2/28/18