Allied Telesis SwitchBlade AT-SB4104-80 빠른 설치 매뉴얼 - 페이지 6
{카테고리_이름} Allied Telesis SwitchBlade AT-SB4104-80에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Telesis SwitchBlade AT-SB4104-80 11 페이지. Switchblade chassis and fan tray
페이지 인쇄
6
Figure1: SwitchBlade rack crossbar.
5.
Remove any packaging and protective material
Inside the chassis: Check that the internal spaces are free of packaging and
protective material.
Outside the chassis: Check that all vents are free from obstruction.
6.
Insert the blank faceplates (if not factory fitted)
When inserting a faceplate, make sure the faceplate's metal back-panel is
aligned with the card guides (see Figure 2 on page -6).
Faceplates are mounted vertically in the SwitchBlade 8 chassis (AT-SB4108) and
horizontally in the SwitchBlade 4 chassis (AT-SB4104).
Figure2: Card guides.
Carefully slide the faceplate into the chassis. The faceplate's captive screws
should line up with the threaded holes on the chassis.
SwitchBlade Chassis and Fan Tray
SwitchBlade Support Bar
bottom card guide
C613-04029-01 REV C