Dell PowerEdge 2900 매뉴얼 - 페이지 17

{카테고리_이름} Dell PowerEdge 2900에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 2900 26 페이지. Tower-to-rack conversion guide
Dell PowerEdge 2900에 대해서도 마찬가지입니다: 설치 정보 (11 페이지), 설치 매뉴얼 (14 페이지), 설치 매뉴얼 (10 페이지), 업데이트 (2 페이지)

페이지 인쇄
Dell PowerEdge 2900 매뉴얼

Removing the Tower Front Plate

Using a T-10 Torx driver, remove the 29 screws that secure the tower front plate to the system chassis. See
Figure 1-5.
Figure 1-5. Removing the Tower Front Plate
1
tower front plate

Installing the Rack Front Plate

1 Using a T-10 Torx driver, install the 34 screws (that came in your kit) to secure the rack front panel to
the system chassis. See Figure 1-6.
NOTICE: Do not over-tighten the screws.
2 Attach the rack ear pieces to the system chassis.
Align the flanges of the right rack ear piece against the right side of the system chassis with the
a
upper flange of the piece inserted between the double walls on the chassis. See Figure 1-6.
Align the flanges with the screw holes and secure the ear piece with four 6-32 flathead Phillips
b
screws. See Figure 1-6.
NOTICE: Do not over-tighten the screws.
Repeat for the left rack ear piece.
c
2
2
M3 x 8 T10 Torx flathead screw
(29)
1
Tower-to-Rack Conversion Guide
15