Dell UltraSharp UP3218K 서비스 매뉴얼 - 페이지 5
{카테고리_이름} Dell UltraSharp UP3218K에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell UltraSharp UP3218K 14 페이지.
Dell UltraSharp UP3218K에 대해서도 마찬가지입니다: 사용자 설명서 (50 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 분해 매뉴얼 (6 페이지)
페이지 인쇄
Tear off the
aluminum foil for releasing the speakers'
cable, then disconnect the cable from the connector.
Use a Philips-head screwdriver to remove four
S6
screws for unlocking the speakers. Remove the
speakers from the probers.
(No.1~4 Screw size=M2x6, Torque=3.5~4kgfxcm)
aluminum foil
2
Tear off three pieces of VBH tape on the specific
position as the picture below shown. Disconnect the
function key cable from the connector of the
interface board. Use a Philips-head screwdriver to
S7
remove eight screws for unlocking the middle iron
bezel with the panel module. Remove the middle
iron bezel.
(No.1~8 Screw size=M3x0.5xL4, Torque=4±0.5kgfxcm)
VBH tape
6
1
2
4. Disassembly and Assembly Procedures
3
1
4
VBH tape
7
8
3
4
5
Use a Philips-head screwdriver to remove four
screws for unlocking the bracket with the panel
module. Use a Jip to lift up the bracket, then tear off
S8
the black mylar tape for releasing the LVDS
connectors. Disconnect the LVDS cables from the
connectors of the panel module.
(No.1~4 screw size=M3x0.5xL4, Torque=4
3
1
Remove the middle iron bezel. Tear off the mylar tape
S9
for releasing the function key cable from the hooks of
the middle iron bezel.
Lift up the bracket chassis module and put it on a
S10
protector
cushion.
0.5kgfxcm)
±
2
4