Dell UltraSharp UP3218K Servicehandleiding - Pagina 5

Blader online of download pdf Servicehandleiding voor {categorie_naam} Dell UltraSharp UP3218K. Dell UltraSharp UP3218K 14 pagina's.
Ook voor Dell UltraSharp UP3218K: Gebruikershandleiding (50 pagina's), Snelstarthandleiding (2 pagina's), Snelstarthandleiding (2 pagina's), Teardown-handleiding (6 pagina's)

Tear off the

aluminum foil for releasing the speakers'

cable, then disconnect the cable from the connector.

Use a Philips-head screwdriver to remove four

screws for unlocking the speakers. Remove the

speakers from the probers.

(No.1~4 Screw size=M2x6, Torque=3.5~4kgfxcm)

aluminum foil

Tear off three pieces of VBH tape on the specific

position as the picture below shown. Disconnect the

function key cable from the connector of the

interface board. Use a Philips-head screwdriver to

remove eight screws for unlocking the middle iron

bezel with the panel module. Remove the middle

iron bezel.

(No.1~8 Screw size=M3x0.5xL4, Torque=4±0.5kgfxcm)

VBH tape

4. Disassembly and Assembly Procedures

VBH tape

Use a Philips-head screwdriver to remove four

screws for unlocking the bracket with the panel

module. Use a Jip to lift up the bracket, then tear off

the black mylar tape for releasing the LVDS

connectors. Disconnect the LVDS cables from the

connectors of the panel module.

(No.1~4 screw size=M3x0.5xL4, Torque=4

Remove the middle iron bezel. Tear off the mylar tape

for releasing the function key cable from the hooks of

the middle iron bezel.

Lift up the bracket chassis module and put it on a

S10

protector

cushion.

0.5kgfxcm)