Dell PowerVault MD3660i Series Storage Array 문제 해결 매뉴얼 - 페이지 7

{카테고리_이름} Dell PowerVault MD3660i Series Storage Array에 대한 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD3660i Series Storage Array 18 페이지. Storage arrays
Dell PowerVault MD3660i Series Storage Array에 대해서도 마찬가지입니다: 하드웨어 및 소프트웨어 매뉴얼 (25 페이지), 설치 매뉴얼 (11 페이지), 시작하기 매뉴얼 (10 페이지), 정보 업데이트 (8 페이지), 랙 설치 지침 (2 페이지), 설정 (2 페이지), 문제 해결 매뉴얼 (20 페이지), 배포 매뉴얼 (24 페이지)

Figure 3. MD Storage Manager Configure Management Ports

NOTE:

IPv4 and IPv6 are both supported protocols on the MD-series iSCSI storage arrays. Whichever

one you use, be aware of the following:

It is possible to enable both IPv6 and IPv4 on your host server. However, Dell



recommends that you disable the one you are not using before setting up your storage

array. Having both enabled may cause miscommunication between the storage array and

host server.

Make sure that the protocol you choose is enabled on both the storage array and host



server. Mixing protocols (for example, enabling IPv4 on the storage array and IPv6 on the

host server) will cause session interrupts and possible loss of data.

Once the storage array is successfully added to MD Storage Manager, all physical and logical

components of your storage array are manageable using the menu-based interface. For more

information on installing and using MD Storage Manager, see the Getting Started Guide and

Deployment Guide that shipped with your storage array. The Help option from the MD Storage

Manager main window also offer additional guidance.