Dell PowerVault RD1000 시작하기 매뉴얼 - 페이지 7

{카테고리_이름} Dell PowerVault RD1000에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault RD1000 20 페이지. Usb 3.0 performance considerations
Dell PowerVault RD1000에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (35 페이지), 중요 정보 매뉴얼 (7 페이지), 보충 설명서 (8 페이지), 사용자 설명서 (29 페이지), 시작하기 매뉴얼 (4 페이지), 시작하기 매뉴얼 (35 페이지)

페이지 인쇄

CAUTION: Before performing any of the following procedures, please read and follow

the safety instructions in your Product Information Guide.

Install Your RD1000 Unit in a System

a Turn off the computer.

b Open the computer cover, using a screwdriver if necessary.

c Slide the Dell™ PowerVault™ RD1000 unit into an unused drive bay

until the bezel is flush with the front of the computer. Secure the unit

using mounting screws (as needed). Do not over-tighten the screws.

Connect the Unit

a Attach the power cable

b Connect the SATA data cable

NOTE: Ensure that all cables are correctly routed

so that they will not bind or become crimped.

Restart Your System

a Replace your computer cover.

b During power-up press F2 key, or other hot key, to enter the BIOS set up mode.

c Enable the SATA port connected to your RD1000 unit.

d Save changes and exit from the BIOS.

to the power connector.

to the SATA connector.

w w w. d e l l .c o m / su p p o r t. d el l . c o m