Dell PowerVault RD1000 Başlangıç Kılavuzu - Sayfa 7

Depolama Dell PowerVault RD1000 için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Dell PowerVault RD1000 20 sayfaları. Usb 3.0 performance considerations
Ayrıca Dell PowerVault RD1000 için: Başlangıç Kılavuzu (35 sayfalar), Önemli Bilgiler Kılavuzu (7 sayfalar), Tamamlayıcı Kılavuz (8 sayfalar), Kullanıcı Kılavuzu (29 sayfalar), Başlangıç Kılavuzu (4 sayfalar), Başlangıç Kılavuzu (35 sayfalar)

CAUTION: Before performing any of the following procedures, please read and follow

the safety instructions in your Product Information Guide.

Install Your RD1000 Unit in a System

a Turn off the computer.

b Open the computer cover, using a screwdriver if necessary.

c Slide the Dell™ PowerVault™ RD1000 unit into an unused drive bay

until the bezel is flush with the front of the computer. Secure the unit

using mounting screws (as needed). Do not over-tighten the screws.

Connect the Unit

a Attach the power cable

b Connect the SATA data cable

NOTE: Ensure that all cables are correctly routed

so that they will not bind or become crimped.

Restart Your System

a Replace your computer cover.

b During power-up press F2 key, or other hot key, to enter the BIOS set up mode.

c Enable the SATA port connected to your RD1000 unit.

d Save changes and exit from the BIOS.

to the power connector.

to the SATA connector.

w w w. d e l l .c o m / su p p o r t. d el l . c o m