Dell PowerVault RD1000 Руководство по началу работы - Страница 7

Просмотреть онлайн или скачать pdf Руководство по началу работы для Хранение Dell PowerVault RD1000. Dell PowerVault RD1000 20 страниц. Usb 3.0 performance considerations
Также для Dell PowerVault RD1000: Руководство по началу работы (35 страниц), Важная информация Руководство (7 страниц), Дополнительное руководство (8 страниц), Руководство пользователя (29 страниц), Руководство по началу работы (4 страниц), Руководство по началу работы (35 страниц)

CAUTION: Before performing any of the following procedures, please read and follow

the safety instructions in your Product Information Guide.

Install Your RD1000 Unit in a System

a Turn off the computer.

b Open the computer cover, using a screwdriver if necessary.

c Slide the Dell™ PowerVault™ RD1000 unit into an unused drive bay

until the bezel is flush with the front of the computer. Secure the unit

using mounting screws (as needed). Do not over-tighten the screws.

Connect the Unit

a Attach the power cable

b Connect the SATA data cable

NOTE: Ensure that all cables are correctly routed

so that they will not bind or become crimped.

Restart Your System

a Replace your computer cover.

b During power-up press F2 key, or other hot key, to enter the BIOS set up mode.

c Enable the SATA port connected to your RD1000 unit.

d Save changes and exit from the BIOS.

to the power connector.

to the SATA connector.

w w w. d e l l .c o m / su p p o r t. d el l . c o m