Dell PowerVault RD1000 사용자 설명서 - 페이지 8

{카테고리_이름} Dell PowerVault RD1000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault RD1000 29 페이지. Usb 3.0 performance considerations
Dell PowerVault RD1000에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (35 페이지), 시작하기 매뉴얼 (20 페이지), 중요 정보 매뉴얼 (7 페이지), 보충 설명서 (8 페이지), 시작하기 매뉴얼 (4 페이지), 시작하기 매뉴얼 (35 페이지)

Blinking GREEN Ejecting Unit is ejecting the cartridge

Steady AMBER

Fault

Blinking AMBER Prevent

Table 3. Cartridge Indicator

The cartridge indicator displays the current status of the cartridge. Table 3 describes the operation of

this indicator:

Indicator Status Meaning Description

Not

OFF

Ready

Steady GREEN

Ready

Blinking GREEN Activity Reading, writing, seeking

Steady AMBER

Fault

Low Power Mode [RD1000 USB 3.0 External only]



If the USB cable is unplugged from the USB 3.0 External dock, or the system that the dock is

connected to is turned off or in standby mode, the dock will enter Low Power Mode and the

dock Power Indicator will turn OFF.



If the media is inserted in the dock while in Low Power Mode the cartridge indicator will also

be turned off.



To eject a cartridge from the dock when it is in Low Power Mode, push and hold the Eject

button for approximately 10 seconds. The cartridge will be ejected, and the dock will go back

into Low Power Mode.



The dock will resume normal operation once the USB cable is reconnected to the computer.

RD1000 unit has detected a fault condition. For more information, run a

diagnostic application (see section

Host computer is accessing the media, and the user has pressed the eject

button. The unit will blink amber for a few seconds then return to a steady

green. The unit will eject the cartridge after the host access completes.

Cartridge is not inserted properly, the unit is in Low Power Mode, or the unit

has no power

Cartridge is ready

RD1000 unit has detected a cartridge fault condition. For more information,

run a diagnostic application (see section

Utility").

"Using the Removable Disk

Utility").