Dell PowerVault TL2000 시작하기 - 페이지 20

{카테고리_이름} Dell PowerVault TL2000에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault TL2000 38 페이지. Tape library
Dell PowerVault TL2000에 대해서도 마찬가지입니다: 릴리스 정보 (3 페이지), 자주 묻는 질문 (26 페이지), 빠른 시작 매뉴얼 (7 페이지), 소프트웨어 설명서 (16 페이지), 구성 매뉴얼 (22 페이지), 중요 정보 매뉴얼 (10 페이지), 사용자 설명서 부록 (2 페이지), 시작하기 매뉴얼 (3 페이지), 첨부 파일 지침 (17 페이지), 브로셔 (4 페이지), 사용자 설명서 (20 페이지)

Figure 1-12. Securing the 4U library to the rack

Connecting the Host Interface Cable

To connect the host interface cables to the library:

1. It is recommended that you shut down and turn OFF the associated server.

2. For a SCSI library, attach one end of the host interface cable to one of the

1-10

Getting Started with the Dell PowerVault TL2000 and TL4000 Tape Libraries

Turn OFF all attached devices. Remove the power cables from the server and

all attached accessories.

Important: Failure to remove the power cords from these devices before

connecting the host interface cable could result in damage to the

library.

connectors on the back panel of the library (see 1 in Figure 1-13 on page

1-11). For a Fibre Channel library, attach one end of the host interface cable to

the connector on the back panel of the library (see 5 in Figure 1-14 on page

1-11). For a Serial Attached SCSI (SAS) connected library, attach the host end of

the SAS cable to the SAS or Mini-SAS (SFF-8088) HBA (see 2 in Figure 1-15

on page 1-11). Full high drives will have dual SAS or Mini-SAS connectors.

Half high drives will have one SAS connector. Unused SAS connectors do not

need to be terminated.