Dell EMC Edge 510 LTE 설치 매뉴얼 - 페이지 9

{카테고리_이름} Dell EMC Edge 510 LTE에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell EMC Edge 510 LTE 24 페이지. Networking switch
Dell EMC Edge 510 LTE에 대해서도 마찬가지입니다: 설정 매뉴얼 (8 페이지)

페이지 인쇄

1. Sim Card

Fans and airflow

The Dell EMC Edge 510 LTE enclosure is fanless.

Power connection

The platform uses an AC-DC power supply.

NOTE:

AC power cable can not be directly connected to the platform.

1. Connect the DC power connector of the PSU into the power connector.

2. Secure by turning the lock-screw on the DC power plug.

3. Plug the AC power cable into the PSU.

4. Connect the other end of the AC power cable into an AC power outlet to power the platform.

Storing components

If you do not install your Edge 510 LTE platform and components immediately, properly store the platform and all components

using these guidelines:

● Storage location temperature must remain constant. The storage range is from -40°C to 70°C (-40° to 158°F).

● Store on a dry surface or floor, away from direct sunlight, heat, and air conditioning ducts.

● Store in a dust-free environment.

NOTE:

ESD damage can occur when components are mishandled. Always wear an ESD-preventive wrist or heel ground

strap when handling the platform and accessories. After you remove the original packaging, place the Edge 510 LTE

platform and components on an anti-static surface.

Site preparations