Dell EMC Edge 510 LTE Kurulum Kılavuzu - Sayfa 9

Anahtar Dell EMC Edge 510 LTE için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Dell EMC Edge 510 LTE 24 sayfaları. Networking switch
Ayrıca Dell EMC Edge 510 LTE için: Kurulum Kılavuzu (8 sayfalar)

Sayfayı Yazdır

1. Sim Card

Fans and airflow

The Dell EMC Edge 510 LTE enclosure is fanless.

Power connection

The platform uses an AC-DC power supply.

NOTE:

AC power cable can not be directly connected to the platform.

1. Connect the DC power connector of the PSU into the power connector.

2. Secure by turning the lock-screw on the DC power plug.

3. Plug the AC power cable into the PSU.

4. Connect the other end of the AC power cable into an AC power outlet to power the platform.

Storing components

If you do not install your Edge 510 LTE platform and components immediately, properly store the platform and all components

using these guidelines:

● Storage location temperature must remain constant. The storage range is from -40°C to 70°C (-40° to 158°F).

● Store on a dry surface or floor, away from direct sunlight, heat, and air conditioning ducts.

● Store in a dust-free environment.

NOTE:

ESD damage can occur when components are mishandled. Always wear an ESD-preventive wrist or heel ground

strap when handling the platform and accessories. After you remove the original packaging, place the Edge 510 LTE

platform and components on an anti-static surface.

Site preparations