Dell EMC Edge 510 LTE Installation Manual - Page 9
Browse online or download pdf Installation Manual for Switch Dell EMC Edge 510 LTE. Dell EMC Edge 510 LTE 24 pages. Networking switch
Also for Dell EMC Edge 510 LTE: Setup Manual (8 pages)
Print Page
Fans and airflow
The Dell EMC Edge 510 LTE enclosure is fanless.
Power connection
The platform uses an AC-DC power supply.
NOTE:
AC power cable can not be directly connected to the platform.
1. Connect the DC power connector of the PSU into the power connector.
2. Secure by turning the lock-screw on the DC power plug.
3. Plug the AC power cable into the PSU.
4. Connect the other end of the AC power cable into an AC power outlet to power the platform.
Storing components
If you do not install your Edge 510 LTE platform and components immediately, properly store the platform and all components
using these guidelines:
● Storage location temperature must remain constant. The storage range is from -40°C to 70°C (-40° to 158°F).
● Store on a dry surface or floor, away from direct sunlight, heat, and air conditioning ducts.
● Store in a dust-free environment.
NOTE:
ESD damage can occur when components are mishandled. Always wear an ESD-preventive wrist or heel ground
strap when handling the platform and accessories. After you remove the original packaging, place the Edge 510 LTE
platform and components on an anti-static surface.
Site preparations
9