Dell N2128PX-ON 소프트웨어 및 펌웨어 업그레이드 - 페이지 6

{카테고리_이름} Dell N2128PX-ON에 대한 소프트웨어 및 펌웨어 업그레이드을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell N2128PX-ON 14 페이지.
Dell N2128PX-ON에 대해서도 마찬가지입니다: 펌웨어 업그레이드 (14 페이지)

Dell N2128PX-ON 소프트웨어 및 펌웨어 업그레이드
Upgrade Dell EMC Networking N2128PX-ON Switches
Attempting to send the STK file to other units in the stack...
File transfer operation completed successfully.
console#show version
Machine Description............... Dell Networking Switch
System Model ID................... N2128PX-ON
Machine Type...................... Dell Networking N2128PX-ON
Serial Number..................... 15114M0002LF
Manufacturer...................... 0xbc00
Burned In MAC Address............. 001E.C9E5.BD0F
System Object ID.................. 1.3.6.1.4.1.674.10895.3066
SOC Version....................... BCM56150_A0
HW Version........................ 1
CPLD Version...................... 16
unit active
---- ----------- ----------- -------------- --------------
1
6.3.6.9
NOTE:
Set the image to use as the boot (active) image after the switch resets.
Images on the N2128PX-ON series switches are named active and backup.
4. Activate
6.5.2.15
console#boot system backup
Activating image backup ..
5. Reload the switch.
console#reload
Management switch has unsaved changes.
Are you sure you want to continue? (y/n) y
Configuration Not Saved!
Are you sure you want to reload the stack? (y/n) y
6. After the switch has finished rebooting, log in and verify that the firmware has been updated to the
version using the show version command. A single switch will typically reboot in around two
6.5.2.15
minutes. A stack may take significantly longer to complete the upgrade process.
console#show version
Machine Description............... Dell EMC Networking Switch
System Model ID................... N2128PX-ON
Machine Type...................... Dell EMC Networking N2128PX-ON
Serial Number..................... CN0K2V1V2829872R0016
Manufacturer...................... 0xbc00
Burned In MAC Address............. 1418.7719.BE85
System Object ID.................. 1.3.6.1.4.1.4413
SOC Version....................... BCM56547_A0
HW Version........................ 3
CPLD Version...................... 8
Image File........................ N2100Stdv6.5.2.15
Software Capability............... Stack Limit = 12, VLAN Limit = 4093
unit active
---- ----------- ----------- -------------- --------------
1
6.5.2.15
7. The switch or stack is now ready for normal operation. Verify the configuration and make any changes
needed prior to connecting the switch to the operational network.
backup
current-active next-active
6.5.2.15
6.3.6.9
firmware
backup
current-active next-active
6.3.6.9
6.5.2.15
6.3.6.9
6.5.2.15
Page 4