Dell Networking Z9500 설치 매뉴얼 - 페이지 30

{카테고리_이름} Dell Networking Z9500에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Networking Z9500 47 페이지. Z9500 switch
Dell Networking Z9500에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (34 페이지)

페이지 인쇄
Dell Networking Z9500 설치 매뉴얼
WARNING: Electrostatic discharge (ESD) damage can occur if components are mishandled.
Ground yourself by using an antistatic wrist strap or other device and connect it to the ESD
grounding jack on the chassis.
1.
Remove the PSU from the electro-static bag.
2.
Use the grab handle to slide the PSU into the switch PSU slot. The PSU slot is keyed so that the PSU
can be fully inserted in only one way. When you install the PSU correctly, it snaps into place and is
flush with the back of the switch.
Figure 8. Installing an AC Power Supply
1.
Release latch
CAUTION: Fan tray modules must be inserted before powering up the switch.
CAUTION: The switch has a high line-voltage requirement of minimum 200V.
30
2.
Slot 0 (for AC PSU 0)
Z9500 Installation