Dell PowerConnect 8164F 구성 매뉴얼 - 페이지 13
{카테고리_이름} Dell PowerConnect 8164F에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerConnect 8164F 17 페이지. Powerconnect 8100 series high-performance 10/40 gbe enterprise switches
Dell PowerConnect 8164F에 대해서도 마찬가지입니다: 사양 (3 페이지)
페이지 인쇄
console(config-if)#exit
console(config)#interface range fortygigabitethernet 1/0/1-2
Note: Port numbering for the 40Gb QSFP ports may vary by switch model and module configuration.
Confirm the correct port range for your configuration.
console(config-if)#datacenter-bridging
console(config-if-dcb)#priority-flow-control mode on
console(config-if-dcb)#priority-flow-control priority 4 no-drop
console(config-if-dcb)#exit
console(config-if)#switchport mode trunk
console(config-if)#exit
console(config)#interface port-channel 1
console(config-if-Po1)#switchport mode trunk
console(config-if-Po1)#exit
3.5
Configure ETS values
console(config)#traffic-class-group weight 50 50 0
Note: This command uses an example of 50% non-iSCSI traffic (first parameter) and 50% iSCSI traffic
(second parameter). The sum of the bandwidth-percentages must be equal to 100.
console(config)#exit
3.6
Save configuration
console# copy running-config startup-config
This operation may take a few minutes.
Management interfaces will not be available during this time.
Are you sure you want to save? (y/n)y
13
SCG1001
Dell Networking N4000 Series and Dell PowerConnect 8100 Series Configuration Guide