Dell PowerConnect B-RX4 설치 매뉴얼 - 페이지 6

{카테고리_이름} Dell PowerConnect B-RX4에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerConnect B-RX4 17 페이지. Instant access point
Dell PowerConnect B-RX4에 대해서도 마찬가지입니다: 매뉴얼 (10 페이지)

페이지 인쇄

Installing the AP

CAUTION: Installation and service of Dell PowerConnect W-Series products should be performed by Professional Installers.

Using the Ceiling Rail Adapter

The access point ships with two ceiling rail adapters for 9/16" and 15/16" ceiling rails.

CAUTION: Make sure the AP fits securely on the ceiling tile rail when hanging the device from the ceiling, because poor

installation could cause it to fall onto people or equipment.

1. Pull the necessary cables through a prepared hole in the ceiling tile near where the AP will be placed.

2. Place the adapter against the back of the AP with the adapter at an angle of approximately 30 degrees to the

tabs (see

3. Twist the adapter clockwise until it snaps into place in the tabs (see

Figure 3

4. If necessary, connect the console cable to the console port on the back of the AP.

Figure

3).

Attaching the Ceiling Rail Adapter

Dell PowerConnect W-IAP130 Series Instant Access Point | Installation Guide

Figure

3).