Dell PowerConnect B-RX4 설치 매뉴얼 - 페이지 5
{카테고리_이름} Dell PowerConnect B-RX4에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerConnect B-RX4 17 페이지. Instant access point
Dell PowerConnect B-RX4에 대해서도 마찬가지입니다: 매뉴얼 (10 페이지)
페이지 인쇄5. Configure each IAP.
CAUTION: Access points are radio transmission devices and as such are subject to governmental regulation. Network
administrators responsible for the configuration and operation of access points must comply with local broadcast regulations.
Specifically, access points must use channel assignments appropriate to the location in which the access point will be used.
NOTE: Dell, in compliance with governmental requirements, has designed the access points so that only authorized network
administrators can change the settings. For more information about AP configuration, see theDell PowerConnect W-Series Instant
Access Point Quick Start Guide and Dell PowerConnect W-Series Dell PowerConnect W-Instant 6.1.2.3-2.0.0.0 User Guide at
support.dell.com.
Identifying Specific Installation Locations
You can mount the access point on a ceiling rail (using the included adapter) or on a wall (using the wall mount
adapter, sold separately). Each location should be as close as possible to the center of the intended coverage area
and should be free from obstructions or obvious sources of interference. These RF absorbers/reflectors/
interference sources will impact RF propagation and should have been accounted for during the planning phase
and adjusted for in RF plan.
Unidentified Known RF Absorbers/Reflectors/Interference Sources
Identifying known RF absorbers, reflectors, and interference sources while in the field during the installation
phase is critical. Make sure that these sources are taken into consideration when you attach an AP to its fixed
location. Examples of sources that degrade RF performance include:
Cement and brick
Objects that contain water
Metal
Microwave ovens
Wireless phones and headsets
Dell PowerConnect W-IAP130 Series Instant Access Point | Installation Guide
5