Dell S4048T-ON 시작하기 매뉴얼 - 페이지 13

{카테고리_이름} Dell S4048T-ON에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell S4048T-ON 35 페이지.

Two-post flush-mount configuration

NOTE:

Your system is not NEBS Earthquake Z4-compliant if you use this installation

method.

For this configuration, remove the latch castings from the front side of each ReadyRails

assembly, item 1.

To remove the two screws and latch casting from each front flange ear, on the switch

side of the rail, use a Torx driver. Retain the castings for future rack requirements. It is

not necessary to remove the rear flange castings.

Attach one rail to the front post flange with two user-supplied screws, item 2.

Slide the plunger bracket forward against the vertical post and secure the plunger

bracket to the post flange with two user-supplied screws, item 3.

Repeat this procedure for the second rail.

Hardware installation