Dell S4048T-ON Getting Started Manual - Page 13

Browse online or download pdf Getting Started Manual for Switch Dell S4048T-ON. Dell S4048T-ON 35 pages.

Print Page

Two-post flush-mount configuration

NOTE:

Your system is not NEBS Earthquake Z4-compliant if you use this installation

method.

For this configuration, remove the latch castings from the front side of each ReadyRails

assembly, item 1.

To remove the two screws and latch casting from each front flange ear, on the switch

side of the rail, use a Torx driver. Retain the castings for future rack requirements. It is

not necessary to remove the rear flange castings.

Attach one rail to the front post flange with two user-supplied screws, item 2.

Slide the plunger bracket forward against the vertical post and secure the plunger

bracket to the post flange with two user-supplied screws, item 3.

Repeat this procedure for the second rail.

Hardware installation