Miele Novotronic G 841 SC Plus 사용 설명서 - 페이지 36
{카테고리_이름} Miele Novotronic G 841 SC Plus에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele Novotronic G 841 SC Plus 49 페이지. Miele novotronic dishwasher operating instructions
Miele Novotronic G 841 SC Plus에 대해서도 마찬가지입니다: 사용 설명서 (48 페이지)
페이지 인쇄
36
There may be a technical
fault.
The spray arm is hitting
an item in the basket.
Items are not secure in
the wash cabinet.
This may be caused by
the installation or the di-
ameter of pipe.
The rinse aid setting may
be too low, or the rinse aid
reservoir is empty.
Dishes were taken out too
soon.
– Turn the program selec-
tor to 'Stop".
– Turn off the dishwasher.
A few seconds later:
– Turn the dishwasher on.
– Select the desired pro-
gram.
– Press the "Start" button.
If the indicators flash
again, there is a technical
problem.
– Call the Miele Technical
Service Department.
Interrupt the program, re-
arrange items blocking
the spray arms.
Interrupt the program and
rearrange loose pieces.
This has no effect on the
dishwasher. If in doubt
contact a plumber.
Increase the dosage or
refill the reservoir, see "Be-
fore using for the first
time".
Leave dishes in longer.