Miele DA 1260 작동 및 설치 지침 - 페이지 23
{카테고리_이름} Miele DA 1260에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 1260 44 페이지.
Miele DA 1260에 대해서도 마찬가지입니다: 작동 및 설치 지침 (44 페이지), 작동 및 설치 지침 (48 페이지), 작동 및 설치 지침 (44 페이지)
페이지 인쇄
Changing a bulb
Bulbs should be replaced with bulbs of
the same type:
Manufacturer ............................... EGLO
Bulb type ...................................... GU10
Specification................................ 12981
Wattage ........................................... 3 W
ILCOS D Code...... DR-3-H-GU10-50/56
Alternatively, the following bulbs can be
used:
Manufacturer ............................... EGLO
Bulb type ...................................... GU10
Specification................................ 11511
Wattage ........................................... 5 W
ILCOS D Code...... DR-5-H-GU10-50/54
These bulbs have a different luminosity.
Only use bulbs of the same type in the
cooker hood.
These bulbs are available from Miele or
from dealers.
Switch off the fan and the lighting.
Remove the grease filters.
Disconnect the cooker hood from the
mains power supply (see "Warnings
and safety notes").
The bulbs can get very hot when
in use.
Allow the bulbs to cool down for a
few minutes before changing them.
Cleaning and care
Loosen the bulb's securing screw a
little.
Slide the screw and the bulb
downwards.
Then tighten the screw again.
Turn the bulb anticlockwise and pull it
out.
Screw the new bulb into the socket.
Please follow the manufacturer's
instructions.
Loosen the screw slightly again, push
the bulb up and tighten the screw.
Refit the grease filters.
23