Miele DA 1260 Operating And Installation Instructions - Page 23
Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele DA 1260. Miele DA 1260 44 pages.
Also for Miele DA 1260: Operating And Installation Instructions (44 pages), Operating And Installation Instructions (48 pages), Operating And Installation Instructions (44 pages)
Print Page
Changing a bulb
Bulbs should be replaced with bulbs of
the same type:
Manufacturer ............................... EGLO
Bulb type ...................................... GU10
Specification................................ 12981
Wattage ........................................... 3 W
ILCOS D Code...... DR-3-H-GU10-50/56
Alternatively, the following bulbs can be
used:
Manufacturer ............................... EGLO
Bulb type ...................................... GU10
Specification................................ 11511
Wattage ........................................... 5 W
ILCOS D Code...... DR-5-H-GU10-50/54
These bulbs have a different luminosity.
Only use bulbs of the same type in the
cooker hood.
These bulbs are available from Miele or
from dealers.
Switch off the fan and the lighting.
Remove the grease filters.
Disconnect the cooker hood from the
mains power supply (see "Warnings
and safety notes").
The bulbs can get very hot when
in use.
Allow the bulbs to cool down for a
few minutes before changing them.
Cleaning and care
Loosen the bulb's securing screw a
little.
Slide the screw and the bulb
downwards.
Then tighten the screw again.
Turn the bulb anticlockwise and pull it
out.
Screw the new bulb into the socket.
Please follow the manufacturer's
instructions.
Loosen the screw slightly again, push
the bulb up and tighten the screw.
Refit the grease filters.
23